Flowmeter selection should pay attention to matters - Database & Sql Blog Articles

Probe current voltage pin 420*4450 head diameter 5.0 over current current and voltage pin

GW MB10F 0.8A 1000V rectifier bridge

Supply 1206 blue light 1206 blue LED quality assurance original authentic large number

On the basis of ensuring the safe operation of the instrument, we strive to improve the accuracy and energy saving of the instrument. To this end, not only must the display instrument that meets the accuracy requirements be selected, but also a reasonable measurement method should be selected according to the characteristics of the measured medium. The main steam flow measurement of power plants, due to its importance to the safety and economy of power plants, generally adopts a mature standard throttling capacity with differential pressure flowmeter. The chemical water treated sewage and fuel are dirty flow and low Reynolds respectively. The number of viscous flows does not apply to standard throttles. For the dirty flow, a non-standard throttle such as a circular orifice plate is used with a differential pressure gauge or an ultrasonic Doppler flowmeter, and the viscous flow can be respectively a volumetric, target or wedge flowmeter. The water volume of the turbine, the circulating water volume of the condenser and the regenerative steam of the regenerative unit are all flow measurement parameters of large diameter (above 800mm). Due to the difficulty in processing and large pressure loss, standard throttling devices are generally not used. According to the special characteristics of the tested media and the measurement accuracy requirements, the plug-in flowmeter, the speed measuring component with the differential pressure gauge, the ultrasonic flowmeter, or the non-loss method such as the marking method and the simulation method are respectively used to measure the flow rate.
In order to ensure the service life and accuracy of the flowmeter, we must pay attention to the anti-vibration requirements of the instrument when selecting the type. Choose wet and humid instruments in hot and humid areas.
Correct selection of the instrument's specifications is also an important part of ensuring the service life and accuracy of the instrument. Special attention should be paid to the choice of static pressure and temperature resistance. The static pressure of the meter is the degree of pressure resistance. It should be slightly larger than the working pressure of the measured medium, generally 1.25 times to ensure no leakage or accident. The choice of the range of the range is mainly the choice of the upper limit of the meter scale. The selection is small, easy to overload, damage the instrument; the selection is large, which hinders the accuracy of the measurement. Generally selected as 1.2 to 1.3 times the maximum flow value in actual operation.
Contact instruments that are installed on production pipelines for long-term operation should also consider the energy loss caused by flow measurement components. Under normal circumstances, multiple measuring elements with large pressure loss, such as throttling elements, should not be used in the same production pipeline.
In short, there is no measurement method or flow meter that can adapt to various fluids and flow conditions. Different measurement methods and structures require different measurement operations, usage methods and conditions of use. Each type has its own unique strengths and weaknesses. Therefore, based on a comprehensive comparison of various measurement methods and instrument characteristics, we should select the best type that is suitable for production requirements, which is safe, reliable and economical and durable.