How to choose a CNC lathe - Solutions - Huaqiang Electronic Network

SMD aluminum electrolytic capacitor

Photocoupler

The CNC lathe turning center is a high-precision, high-efficiency automated machine tool. It has a wide range of processing properties, processing linear cylinders, diagonal cylinders, arcs and various threads. It has various compensation functions such as linear interpolation and circular interpolation, and has played a good economic effect in mass production of complex parts. Reasonable selection of CNC lathes should follow the following principles:
1. Pre-preparation to determine the process requirements of typical parts, batch processing of workpieces, the function of the CNC lathe should be prepared in advance, and the preconditions for the rational selection of CNC lathes meet the technical requirements of typical parts.
The process requirements for typical parts are primarily the structural dimensions, processing range and accuracy requirements of the part. The control accuracy of the CNC lathe is selected according to the accuracy requirements, that is, the dimensional accuracy, positioning accuracy and surface roughness of the workpiece. According to reliability, reliability is the guarantee for improving product quality and production efficiency. The reliability of a CNC machine tool means that the machine tool runs stably for a long time without failure when it performs its function under specified conditions. That is, the average time between failures is long, and even if a fault occurs, it can be recovered in a short time and put back into use. Choose machine tools that are well-structured, well-made, and mass-produced. In general, the more users, the higher the reliability of the CNC system.
2. Machine tool accessories and tools purchase machine accessories, spare parts and their supply capacity, tools, is very important for the production of CNC lathes, turning centers. When choosing a machine tool, careful consideration must be given to the fit of the tool and accessories.
3. Pay attention to the identity of the control system. Manufacturers generally choose the same manufacturer's products, at least the same manufacturer's control system should be purchased, which brings great convenience to the maintenance work. Teaching units, because they need students to know more, choose different systems, and equipped with various simulation software is a wise choice.
4. According to the performance price ratio, choose the function, the precision is not idle, not waste, do not choose the function that has nothing to do with your own needs.
5. When the protection of the machine tool is required, the machine tool can be equipped with a fully enclosed or semi-closed guard and an automatic chip removal device.
When selecting a CNC lathe and turning center, the above principles should be considered comprehensively. The following small series introduces a CNC lathe for high-volume, high-precision and complex small and medium-sized parts processing in the electronics, communication, IT, medical, aviation, military and other industries.