MOXA launches 16 + 2G port Gigabit managed redundant industrial Ethernet switch-E

MOXA launches 16 + 2G port Gigabit managed redundant industrial Ethernet switch--EDS-518A series

Introduction MOXA EtherDevice â„¢ Switch EDS-518A series is designed for industrial applications and is an 18-port industrial Ethernet switch. It is equipped with 2 Gigabit and 16 Fast Ethernet network connection ports, it provides high-performance Ethernet network connection function and a variety of real-time network management functions, can build Gigabit redundant Ethernet ring network architecture, especially suitable for the backbone of industrial automation applications Network, high reliability quality can ensure that your industrial automation system operates 24 hours a day.
The effective device management and network management functions of EDS-518A series industrial Ethernet switches allow you to easily master the automated Ethernet network. Its tough hardware design is suitable for a variety of severe industrial environments.
In addition, various management settings can be made through a web browser and Windows uTIlity, making installation and configuration faster and more accurate.
Features Industrial networking capabilities * Redundant Gigabit Ethernet ring network and RSTP (IEEE802.1W) capability (recovery time <20ms under full load)
* IGMP Snooping and GMRP, used to filter multicast traffic from industrial Ethernet protocol * Support IEEE802.1Q VLAN and GVRP protocols, make network planning simple and easy * Support Qos --- IEEE 802.1p / 1Q and TOS / DiffServ, Increase decision power * Support 802.3ad (LACP) to maximize the use of bandwidth * Support IEEE802.1X and SSL to enhance network security * SNMP V1 / V2c / V3 for different levels of network management * RMON function can provide effective network monitoring and Ability to predict


Designed for industrial applications * Bandwidth management prevents unpredictable network status * Supports ABC-01 (automatic backup setting tool), making it easier to replace faulty devices * Locking the port allows only authorized MAC address access * Port mirroring can be used for online debugging * Automatic alarm through E-mail and relay output 518A * Digital input interface can integrate sensors and alarms with IP network * Automatically restore the IP address of the connected device * Redundant dual DC power input * IP30 protection level, high strength corrugated Shell * Quick change of the connection for changing wires (patent)
* Support 40km / 80km transmission distance * Guide rail / panel installation * Send Ping command to determine network connectivity * Redundant 12 ~ 45V DC power input, overload protection


Recommended software and accessories

* ABC-01, automatic backup configurator, RS-232 interface (RJ45 type)
* EDS-SNMP OPC Server Pro
* DR-45-24, DR-75-24, DR-120-24 DIN-Rail rail mounted 24V DC power supply series

Technical parameters Standard: IEEE802.3, 802.3u, 802.3x, 802.1D, 802.1W,
802.1Q, 802.1p, 802.1X, 802.3ad, 802.3z
Protocol: IGMP V1 / V2 / V3 device, GMRP, GVRP, SNMP V1 /
V2c / V3, DHCP server / client, DHCP OpTIon 82, BootP,
TFTP, SNTP, SMTP, RARP, RMON
MIB: MIB-II, Ethernet-Like MIB, P-BRIDGE MIB,
Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB
Group 1, 2, 3, 9
Flow control: IEEE802.3x flow control, back pressure flow control

Interface RJ45 interface: 10 / 100BaseT (X) or 10/100 / 1000BaseT (X) Adaptive fiber port: 100BaseFX (SC / ST interface) and optional 1000BaseSX / LX / LHX / ZX (LC interface)
Control port: RS-232 (RJ45)
LED indicator: PWR1, PWR2, FAULT, 10 / 100M (electrical port),
100M (optical port), MASTER, COUPLER
Alarm output: two relay outputs, current load capacity 1A @ 24 VDC
Digital input: electrical isolation, common ground • State 1: +13 ~ + 30V
• State 0: -30 ~ + 3V
• Maximum input current: 8mA

Fiber 100BaseFX
distance:
Multimode: 0 ~ 5 km, 1300 nm (50/125 μm, 800 MHz * km)
0 ~ 4 km, 1300 nm (62.5 / 125 μm, 500 MHz * km)
Single mode: 0 ~ 40 km, 1310 nm (9/125 μm, 3.5 PS / (nm * km))
0 ~ 80 km, 1550 nm (9/125 μm, 19 PS / (nm * km))
Minimum TX output:
Multimode: -20 dBm
Single mode: 0 ~ 40 km, -5 dBm
0 ~ 80 km, -5 dBm
Maximum TX output:
Multimode: -14 dBm
Single mode: 0 ~ 40 km, 0 dBm
0 ~ 80 km, 0 dBm
RX sensitivity: -36 ~ -32 dBm (single mode), -34 ~ -30 dBm (multimode)
1000BaseSX / LX / LHX / ZX
distance:
Multimode:
• 1000BaseSX 0 ~ 500 m, 850 nm (50/125 μm, 400 MHz * km)
0 ~ 275 m, 850 nm (62.5 / 125 μm, 200 MHz * km)
• 1000BaseLX 0 ~ 1100 m, 1310 nm (50/125 μm, 800 MHz * km)
0 ~ 550 m, 1310 nm (62.5 / 125 μm, 500 MHz * km)
Single mode:
• 1000BaseLX 0 ~ 10 km, 1310 nm (9/125 μm, 3.5 PS / (nm * km))
• 1000BaseLHX 0 ~ 40 km, 1310 nm (9/125 μm, 3.5 PS / (nm * km))
• 1000BaseZX 0 ~ 80 km, 1550 nm (9/125 μm, 19 PS / (nm * km))
Minimum TX output: SFP-1GSXLC -9.5 dBm
SFP-1GLXLC -9.5 dBm
SFP-1GLHXLC -4 dBm
SFP-1GZXLC 0 dBm
Maximum TX output: SFP-1GSXLC -4 dBm
SFP-1GLXLC -3 dBm
SFP-1GLHXLC +1 dBm
SFP-1GZXLC +5 dBm
RX sensitivity: SFP-1GSXLC 0 ~ -18 dBm
SFP-1GLXLC -3 ~ -20 dBm
SFP-1GLHXLC -3 ~ -24 dBm
SFP-1GZXLC -3 ~ -24 dBm

Power input voltage: 24 VDC (12 ~ 45 VDC), redundant input current (@ 24V): 0.67A (EDS-518A), 0.78A (EDS-518AMM,
EDS-518A-SS)
Interface: 2 removable 6-pin terminals overload protection: provide reverse connection protection: provide

Mechanical characteristics Housing: IP30 protection grade Dimensions (W x H x D): 95 x 135 x 140 mm
3.74 x 5.31 x 5.51 in.
Weight: 1630 g
Installation method: guide rail, wall hanging (optional kit)

Working environment Operating temperature: 0 ~ 60 ° C (32 ~ 140 ° F)
-40 ~ 75 ° C (-40 ~ 167 ° F) (wide temperature product)
Storage temperature: -40 ~ 85 ° C (-40 ~ 185 ° F)
Relative humidity of surrounding environment: 5% ~ 95% (no condensation)

Certified safety: UL508, UL60950-1, CSA C22.2 No. 60950-1,
EN60950-1
Dangerous environment:
UL / cUL Class I, Division 2, Groups A, B, C and D (under certification)
ATEX Zone 2, EEx nC IIC (in certification)
Maritime: DNV, GL
EMI: FCC Part 15, CISPR (EN55022) class A
EMS: EN61000-4-2 (ESD), level 3
EN61000-4-3 (RS), level 3
EN61000-4-4 (EFT), level 2
EN61000-4-5 (Surge), level 3
EN61000-4-6 (CS), level 3
EN61000-4-8
EN61000-4-11
EN61000-4-12
Shock: IEC60068-2-27
Free fall: IEC60068-2-32
Vibration: IEC60068-2-6
MTBF: 240,000 hrs
Database: Telcordia (Bellcore), GB
* For the latest developments in product certification, please visit the Moxa website.

Warranty 5 years warranty

Available models
Product Number Description EDS-518A Industrial grade network management type Gigabit redundant Ethernet switch EDS-518A with 16 10 / 100BaseT (X) ports and 2 combo 10/100 / 1000BaseT (X) / SFP (mini-GBIC) ports MM-SC 14 10 / 100BaseT (X) ports, 2 multimode 100BaseFX ports, SC interface and 2 10/100 / 1000BaseT (X) / SFP (mini-GBIC) interface I Ethernet switch EDS-518A-MM-ST 14 10 / 100BaseT (X) ports, 2 multimode 100BaseFX ports, ST interface and 2 10/100 / 1000BaseT (X) / SFP (mini-GBIC) interfaces Industrial grade network management type Gigabit redundant Ethernet switch EDS-518A-SS-SC 14 10 / 100BaseT (X) ports, 2 single-mode 100BaseFX ports, SC interface and 2 10/100 / 1000BaseT (X) / SFP (mini-GBIC) interface industrial-grade managed Gigabit redundant Ethernet switch EDS-518A-SS-SC-80 14 10 / 100BaseT (X) ports 2 single-mode (optical fiber transmission distance 80 km) 100BaseFX Port, SC interface, and 2 10/100 / 1000BaseT (X) / SFP (mini-GBIC) interface industrial-grade managed Gigabit redundant Ethernet switches
OPC server software
Product number description EDS SNMP-OPC server CD installation accessories with EDS-SNMP OPC server software and manual
Product Number Description WK-46 Wall Mount Kit Rail Power Supply
Product Number Description DR-4524 45W / 2A DIN-Rail 24VDC power supply, universal 85 ~ 264 VAC input DR-75-24 75W / 3.2A DIN-Rail 24VDC power supply, universal 85 ~ 264 VAC input DR-120-24 120W / 5A DIN-Rail 24VDC power supply, 88 ~ 132 VAC / 176 ~ 264 VAC input by switch
SFP-1G module
Product number description SFP-1GSXLC SFP module, 1 1000BaseSX interface, LC connector, 0.5 km distance transmission, 0 ~ 60 ° C
SFP-1GLXLC SFP module, one 1000BaseLX interface, LC connector, 10 km distance transmission, 0 ~ 60 ° C
SFP-1GLHXLC SFP module, one 1000BaseLHX interface, LC connector, 40 km distance transmission, 0 ~ 60 ° C
SFP-1GZXLC SFP module, one 1000BaseZX interface, LC connector, 80 km distance transmission, 0 ~ 60 ° C

Specialed in developing and manufacturing in all kins of mobile phone chargers around 15 years  with our own brand MLF, also with much  OEM/ODM experience and including help our customer to do customized plastic housing mold . Our factory can output 300K pcs high quality USB 2.0 Mobile Phone Charger daily

Mobile Phone Charger

Mobile Phone Charger,Fast Phone Charger,Cell Phone Charger,Dual Usb Charger

Meile Group Limited , https://www.hkmeile.com