Samsung rear-projection TV convergence adjustment method to share - android - Phones Developers

Adjustable capacitor from Murata - Genuine Original

Samsung Tantalum Capacitor TCSCS1E105MAAR - Original Spot

TZC3Z030A110R00 MURATA - Adjustable Capacitor - Original Spot

If you're working with a Samsung rear-projection TV and need to adjust the convergence, there are several methods you can try. Here’s a step-by-step guide to help you through the process:

1. Press the mute button on your remote control, then press the number keys 1, 8, and 2 in sequence. This should bring up the convergence adjustment menu.

2. Alternatively, press the mute button again, then enter 183 using the number keys. This is another common way to access the same settings.

3. If your remote doesn't have an R/B (Red/Blue) button, consider using a universal remote. Once you find a button that displays "Invalid setting," use the original remote to press 183 to proceed.

4. For users of the Huayu universal remote, enter the password 050. After pressing the menu right button, if the screen shows “Invalid setting,” press 183 to continue.

To make things easier, some people prefer to first press the mute button, then enter 1, 8, and 3 to access the convergence adjustment interface. From here, you can use the number keys 7, 8, and 9 to select red, green, and blue respectively. Use the directional buttons on the remote to navigate and choose which color you want to adjust.

The channel up/down and volume up/down buttons will allow you to fine-tune the position of each color point. Your goal is to align the red, green, and blue lines perfectly so that the image looks clear and sharp. Once all three colors match correctly, the convergence issue should be resolved.

Remember, this process might vary slightly depending on the model of your TV. If you encounter any difficulties, it's always a good idea to consult the user manual or reach out to Samsung support for further assistance.