The technology related to the Internet of Things is mature, and the import cost is also continuously compressed.
With many low-power transmission technologies for IoT applications matured and put into commercial applications, IDC boldly predicts that the global IoT market will see US$900 billion in 2017, and even three years later, the market will double to 1.4 trillion USD. It is estimated that the IoT device can reach more than 30 billion units.
According to the IDC market research organization, the size of the Internet of Things (IOT) market will grow tremendously in the next three years. The IoT market will have a market share of more than US$900 billion. The data generated by the Internet of Things market in the next three years will be generated. The amount will also increase sharply. It is estimated that IoT devices will increase to 30 billion units, and the amount of data generated by IoT terminals will grow by hundreds of ZBs (1ZB equals 10 9th power TB), according to growth. The curve estimates that the amount of data generated by IoT devices in 2020 may exceed the spectrum of 600ZB.
IoT related technologies mature and existing enterprises import applications
The Internet of Things application field, device technology and communication technology are relatively mature. The embedded computing platform, communication chip and technology underlying layer can meet the requirements of constructing application platform, and more and more enterprises will introduce IoT applications. In addition to the cost of IoT equipment, the integration of Netcom technology, and the integration of back-end technologies, the most important key is the information communication system architecture and network maintenance conditions. In terms of the selection of Netcom technology solutions, relevant low-power Netcom technology has entered the commercial application market since 2017. In addition to the maturity of the solution, the import cost has continued to be compressed.
Especially in the IoT device, the data acquisition and analysis capabilities are more and more powerful. Observing the IoT application architecture, the Netcom solution based on the Internet of Things communication technology, in addition to the high stability and low cost conditions, may be targeted at different application nodes. The difference in the amount of data generated will also vary the speed requirements of the transmission technology solution.
In terms of high-speed transmission application direction, the Netcom transmission requirements of IoT devices such as monitoring, environmental analysis, and big data capture will also be higher, and the Netcom solution corresponding to the requirements for large data transmission of the Internet of Things has also made new progress, such as multiple telecommunications. The NB-Internet of Things, which the business owner pushed, was also introduced into the commercial field in 2017.
Seeing the potential of car networking applications 5G Netcom technology has received much attention
Even in the United States, Japan, South Korea and other large telecom service providers are also looking at 5G mobile communication network services, and actively investing in 5G communication application deployment, such as base station, 5G application infrastructure, etc., which is based on IoT devices based on 5G mobile data communication. Say, it is equal to the possibility of significantly expanding the application of IoT terminal devices.
Because the performance of 5G mobile data communication can be as high as 10~20Gbps, it is comparable to the transmission performance of the solid line network. Under the integration of 5G communication network application, the networking capability and transmission efficiency of IoT devices can be greatly improved, and the need for high-speed transmission needs can be met. IoT applications, or data transmission integration of regional IoT devices through 5G mobile data networks, enable IoT networks to be deployed at cost and performance to meet application needs.
In addition to NB-Internet of Things in 2017, 5G mobile communication launched commercial testing in many countries, many communication manufacturers and specifications development organizations are fully committed to actively promote the commercial market, especially the 5G mobile communication network Netcom service providers are relatively active. As long as 5G communication service providers grab the IoT application service backbone network system architecture application market, the Internet of Things application services that will reach the market scale of 10 billion in the future will be able to achieve considerable profit.
Low-power Netcom technology continues to fever demand for IoT applications
In addition to the large-scale communications industry to actively enter the IoT application field, in fact, low-power wireless communication application technology is also actively absorbing the food networking application market, because under the device deployment architecture of IoT applications, not all devices can be accessed. Unlimited Netcom and power supply resources, most IoT equipment deployments will operate in more harsh environments. For example, IoT devices themselves need to be deployed outdoors, and equipment access to electricity (even battery-powered, solar-powered, etc.) Netcom technology that can be used must also require the introduction of low-power or low-power Netcom technology solutions.
In terms of low-power, very low-power Netcom technology solutions, the recent development of the IoT market is also extremely amazing. For example, the Bluetooth 5 short-range wireless communication solution has been released in 2017, and related applications are gradually being developed. The related solution can be used to import the IoT application architecture.
Similarly, there are technical solutions such as Halow and LoRa to grab the application market. Although the transmission power, transmission distance, and application field have their own strengths and solutions, they are actually not only related to 2017-18. More mature, the cost of key chips and certifications introduced by technology will also be reduced due to the increase in usage. The technical sparks of related technologies in IoT applications are still worth looking forward to.
Endpoint operations can effectively improve the performance of IoT services
Communication technology is the focus of recent IoT applications. Edge CompuTIng is another focus of IoT applications. Because it is a practical bottleneck after opening up bottlenecks in IoT devices such as communication and power consumption. If the IoT device can perform front-end analysis, processing and data optimization procedures, it will make the IoT application deployment more flexible and flexible. That is to say, if it is in the IoT application domain, it can be at the front end of the IoT device. Through the data collection terminal for preliminary analysis and extraction of data, only the key value information is transmitted to the back-end IoT cloud service for advanced analysis and storage, which not only can greatly reduce the computing load of the IoT back-end system, but also make the overall system The operation is more flexible and efficient.
Especially with the introduction of IoT devices, the amount of data generated every day and every day may be large, so that the back-end analysis system cannot be carried. When more and more key IoT applications are imported, the enterprise's The Internet of Things should have a bottleneck in data processing and analysis. At this time, if the IoT endpoint or data processing endpoint can perform preliminary operations and analysis, the amount of data generated by a large number of IoT terminals can be prevented from being processed by the back-end system.
Decentralized data analysis and extraction processing pressure, the technical solution of endpoint computing will greatly improve the deployment performance of IoT systems, and more and more complex primary computing and analysis work can be distributed to the front-end IoT devices for processing. IoT applications have become smarter and more efficient.
Internet of Vehicles applications become the main driver of the Internet of Things market
Another key direction observation can be introduced from the industry dynamics of IoT applications. It can be found that the recent action is the IoT application of the Internet of Things. For example, Qualcomm bought the car chip manufacturer NXP Semiconductors, Japanese software. Bank (SoftBank) spent 10 billion to buy ARM, highlighting the commercial potential of the vehicle IoT gradually emerged, and even the processor manufacturer Intel has set up autonomous driving R&D department. It is obvious that the Internet of Things will be extremely high in the future. The commercial value of the car based on the Internet of Things IoT solution will generate many additional derivative applications and benefits.
As for the IoT application based on the Internet of Vehicles, in addition to the IoT integration requirements of the autonomous driving concept, each car in the driving process is equal to a mobile IoT data capturing endpoint, and the state of the vehicle 'moving', The Netcom solution for the vehicle IoT is more attractive for data transmission in mobile communication. In the application field of the vehicle IoT, the Internet of Things transmission technology based on 5G mobile communication will have more development advantages, while in the data. Transmission capacity, high-speed mobile network stability, etc., but more suitable for car Internet IoT device import, which is why 5G mobile applications will be actively concerned by communication service providers.
MTB-CUT 180AL Hydrogel Film Cutter
Professional Mtb-Cut 180Al Hydrogel Film Cutter manufacturer is located in China, including Hydrogel Film Cutter,Phone Protector Machine,Mobile Cover Cutting Machine, etc.Professional Mtb-Cut 180Al Hydrogel Film Cutter manufacturer is located in China, including Hydrogel Film Cutter,Phone Protector Machine,Mobile Cover Cutting Machine, etc.Professional Mtb-Cut 180Al Hydrogel Film Cutter manufacturer is located in China, including Hydrogel Film Cutter,Phone Protector Machine,Mobile Cover Cutting Machine, etc.Professional Mtb-Cut 180Al Hydrogel Film Cutter manufacturer is located in China, including Hydrogel Film Cutter,Phone Protector Machine,Mobile Cover Cutting Machine, etc.
Mtb-Cut 180Al Hydrogel Film Cutter,Hydrogel Film Cutter,Phone Protector Machine,Mobile Cover Cutting Machine
Mietubl Global Supply Chain (Guangzhou) Co., Ltd. , https://www.mietublmachine.com